I Technical Features

1. Excellent Workability
UGM paste possesses superfluity at very low w/s and can fill any designated space completely.

2. Non-shrinking
Because UGM posses small expansive function, foundation bolt and pedestal of facilities can be combined with concrete foundation steadily.

3. Non-bleeing
UGM paste shows no signs of bleeding and settlement; thus poor conjunction can be avoided.

4. Higher early and final strength
At the age of 1 day, compressive strength value is more than 20 MPa ;at the age of 28 days, compressive value is more than 80 MPa.Therefore facilities can be installed with in 1-3days.

5. Higher bond strength Hardened UGM body posses stable expansive stress, thus bond stress of UGM body to foundation bolt is large; an bond of UGM body to old concrete is strong.

6. Superior durability UGM is inorganic grout material, hardened UGM body shows no signs of aging, and possesses superior resistance to the corrosion of reinforcement.

II Application

1. Pouring secondly foundation bolt of large-scale facilities or maternity base.

2. Pouring facilities and structural steel-concrete anchoring. Pouring preformed cavity that is available of stretching post-tensioned prestressed wire.

3. Pouring structures working joint.

4. Strength secondary beam and pillar.

5. Making self-leveling materials.

III Technical Properties

1.Setting time: initial set≥2 hours, final set≤10 hours.

2.Non-bleeding

3.Fluidity:more than　?250 mm

4.Compressive strength: 1 day≥20Mpa, 3 day≥30Mpa 7 days≥50Mpa, 28 days≥70Mpa.

5.Free expansive ratio >0.2%

6.Bond strength: 28days≥6Mpa.

IV Instruction to use

1 .At pouring small-area space, UGM can be mixed with water directly. It's mixture ratio is UGM :water=1:0.13-0.15 (13%～15%)

2.At pouring large space, put some pea grovels into UGM firstly (UGM: pea gravels=2:1),then mix the compound with water. The compressive strength and expansive ration can not be altered when pea graves is put into UGM.

3. At pouring hole or small-area space, adopt penetrative manner by labor to density UGM mortar. Finishing and compassing must be done as soon as exposed surface is digraph.

4. After reaching final setting time, hardened spraying water or covering wet sack must cure UGM body. The curving time is 7-14 days.

V Specification

Appearance: Grey powder
Bray density: 2000Kg/m3
UGM is supplied in 50Kg moisture resistant sacks.
UGM is service life is one year

□ Application of the products

Water Cube of Beijing Olympic Swimming Pool, Office Building of ICBC, The Third Research Academy of CASIC, Installation Engineering Company of China First Construction Bureau(Group), The Sixth Chemical Engineering Company of China, Unit 61517 of PLA, Beijing Asia-Pacific Space Co., Ltd, Beijing Modern Construction Engineering Co., Ltd., Beijing Jiarui Equipment Co., Ltd., Tianjin Tong Xin Tong You Mechanical & Electric Co., Ltd., Nantong Second Construction Group Corporation, Shenzhen Road Capital Construction Materials Co., Ltd., Postponed Programs of Burma Cement Plant, Qiqihar Heavy CNC Center, Fushun Electromagnetic Plant, Dalian Marine Propeller Plant, Qinhuangdao Hardware Mechanical & Electric Co., Ltd., Hebei Zhongjie Petrol Chemistry Group Corporation, Tianse Tangshan Power Development Engineering, Hengye Construction Engineering Company of Qianxi County, Hua An Shun Construction & Decoration Co. Ltd., Zhuzhou Xingtai Industry Co., Ltd., Shandong HengAn Paper Co., Ltd., Installation Engineering Company of Shanxi Industry Group Corporation, Yinchuan GiTi Tire Co., Ltd..