Introduction Contact Us Add Favorite 中文版
 ·Soundless Cracking Agent
 ·UGM
 ·UEA-H
 ·N-series High Range Water Reducers
·内蒙古九峰中草药公司
·智博录入公司
·翻译公司
·视频光端机
·世荣货架系列
·专业标志设计包装设计
·红楼广告设计vi设计
·婚纱摄影

·礼品公司

Soundless Cracking Agent

CHARACTERISTICS OF HSCA

Soundless Cracking Agent

For demolishing concrete and rock

WITHOUT NOISE.VIBRATION FLY ROCK.GAS.
HSCA is a noncombustible and non-explosive material. It is safe and convenient in transportation, storage and operation.
HSCA is a silent demolition agent which does not cause annul Vibration, Noise, flyrock, ash and hazardous gas during demolition.
Demolition.
Demolition and cutting are allowed to be used according to working scheme.
HSCA can gain a high yield for mining of granite, marble etc. It is very easy.
To crush & remain reinforced concrete structures on demand during demolition. Easy to operate at job site.

HSCA is a kind of in organic material consisted of calcium, silicon, iron and aluminum in the form of powder.

Expansive pressure (Map)
Expansive pressure of HSCA
The HSCA slurry should be poured into hole drilled into rock or concrete. The expansive Pressure can be introduced in the hoes in 2-3hours after filling, making Rocks, granite and white marble crack.
The cracks further spread and become wider and wider with time as to root out easy to rocks etc.

To keep dry in storage about a year of time of efficacy can be reached.

APPLICATION OF HSCA
Mining and cutting of marble and granite. For mining of marble and granite, the yield is 2-3 times higher with HSCA than by current explosion method. Because of non-vibration crush, the yield is also doubled.
Crushing and demolition of structures of concrete and reinforced concrete HSCA can be applied in the field where cracking by mean of explosive is not suitable. While crushing and demolition is carrying. Workshop and traffic near operating site is still.

CRACKING DESING OF HSCA

Hole diameter and hole space. Hole diameter 30-50mm.

Hole space in accordance with the following formula.

A=KD
Where, A-hole space (mm)
D-diameter (mm)
K-cracking coefficient
K VALUE OF ROCKS AND CONCRETE

MATERIALS TO BE CRACKED K值 STEEL CONTAIN
SOFT VIRGIN ROCKS 10-16  
MIDDLE HARD VIRGIN ROCKS 8-12
HARD VIRGIN ROCKS 5-10
PLAIN CONCRETE 10-16 0-30
8-10 30-60
6-8 60-100

K value changes along with the geometry of rock& concrete

The hole depth and the height of rocks and concrete are in proportion as 80-100%

UNIT CONSU MPTION OF HSCA

MATERIALS TO CRACKED HSCA USED(KG/M3)
SOFT HARDLE VIRGIN ROCKS 8-10
MIDDLE HARDLE VIRGIN ROCKS 10-12
HARD VIRGIN ROCKS 12-20
ROCKS CUTTING 5-15
PLAIN CONCRETE 8-10
REINFORCED CONCRETE 15-15

REFERENCE CONSUMPTION OF HSCA WHEN HOLE DEPTH IS ONE METER

CONSUMPTION(KG/M3) 30 32 34 36 38 40 42 44 46 48 50
HOLE DIAMETER(MM) 1.2 1.3 1.5 1.7 1.9 2.1 2.3 2.5 2.8 3.0 3.2

OPERATION OF HSCA AT JOB SITE
Drilling: drill hole with a air drill according to the requirements of design. Stirring devices: 10-20 liter plastic or metal barrel.
Mixer: allow small amount of HSCA to mix by hand, but need using rubber glove. Measuring water devices: measuring glass protector, rubber glove, protective glasses.
stirring: pour about 1.5litre clean water into a container and add one bag of HSCA slowly (pour water 30% of HSCA by weight) then mix well with a mixer until it becomes a slurry of good fluidity . Filling: First of all, clean up the holes before filling .
HSCA slurry should be poured into hole within 10 minutes after mixing with water . For horizontal holes, a grouting pump and a plug for stopping up are required, or fill the holes with thick paste of HCSA.
Cracking and cutting time:
The cracks appear in 2-3 hours after filling, depending on air temperature of rocks and concrete. The cracks further spread and become wider and wider with time.
Points for attention.
For safety, protective glasses is needed when working. After filling, do not look at any hole closely and directly. Keep dry in storage. Make a choice among the types of HSCA products and use one which is suitable to working temperature.




□ Application of the products

Jinji Marble Mine of Guangdong, Qingdao General Plant of Squared Stone, Central & Admiralty Field of Hong Kong, Research Institute of Mining & Metallurgy, Construction field, Shijingshan Power Plant, Fundamental cracking, Madian Cement Plant.


 Address:China building materals academy,guanzhuang,chaoyang district,beijing,china.
Tel:+86-01088385160 Fax:+86-01068318955 Contact:ZhangXiumei
Email:info@bjzhongyan.com
WebSite::http://www.bjzhongyan.com
京ICP备05033043号